EasyManuals Logo

Intel STL2 - Server Board Motherboard Product Guide

Intel STL2 - Server Board Motherboard
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
Equipment Log and Power Consumption Worksheets 73
Current Usage
NOTE
Both processors pull power from +5V. This may limit the number of drives
and/or add-in cards you may install.
As an overall current usage limitation on the power supply, do not exceed a combined power output
of 195 watts for the +5 and +3.3 volt outputs.
The PCI slots on the server board are rated at a maximum of 5 amperes per slot. The maximum
power allowed for each slot is 20 watts at +5 volts. The average current usage per slot should not
exceed 3.0 amperes per slot; that is, 15 watts.
The cooling efficiency varies per slot; therefore, ensure that adequate cooling is available in the
target slot—especially in an expansion slot drawing more than 2.0 amperes.
Calculating Power Consumption
The total combined wattage for the system configuration must be less than the output of your power
supply. Use the two worksheets in this section to calculate the power used by your server boards.
For current and voltage requirements of add-in boards and peripherals, see your vendor documents.

Table of Contents

Other manuals for Intel STL2 - Server Board Motherboard

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel STL2 - Server Board Motherboard and is the answer not in the manual?

Intel STL2 - Server Board Motherboard Specifications

General IconGeneral
BrandIntel
ModelSTL2 - Server Board Motherboard
CategoryServer Board
LanguageEnglish

Related product manuals