Intel STL2 - Server Board Motherboard - Configuration Jumper (1 L4)

66 Intel Server Board STL2 Product Guide
Table 7. Configuration Jumper (1L4)
Jumper Name Pins What it does at system reset
FRB 3 1-2 If these pins are jumpered, FRB is disabled.
Front Cover Chassis
Intrusion Sensor
3-4 This is an alternate connector for the chassis intrusion switch. The
preferred connector is pins 1-2 on block 6A.
Reserved 5-6 Reserved. These pins should be jumpered.
Reserved 7-8 Reserved. These pins should not be jumpered.
Reserved 9-10 Reserved. These pins should not be jumpered.
Reserved 11-12 Reserved. These pins should not be jumpered.