22
Note: only when the communication option chosen is Cloud it will be possible to
read the QR code. When entering the Cloud/IP address or the IP Receiver data, also
enter the remote access password (6 digits) available on the label or the password
878787, if the center has already been reset to factory default .
AMT Mobile V3
The AMT Mobile app provides monitoring of the residential or commercial property
using the Intelbras monitoring centers through the smartphone.
Attention: we advise that the monitoring of your alarm system be done by a moni-
toring company, because the application does not replace the monitoring company’s
service.
To add a control panel press the “+” icon at the top of the screen, as outlined below:
On the next screen you can change the description of the center, select the communi-
cation mode, change the partitions that the activation button will activate, and select
which zones will be enabled.
To Next Page
Loading...
