Intelbras AMT 2018 E - Page 48

48
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 901 + ENTER 1 + ENTER
Note:
» Sensor Tamper.
» Factory Default: Enabled.
ENTER + 901 + ENTER 2 + ENTER
Note:
» Bus Receiver or Keyboard Problem.
» Factory Default: Enabled.
ENTER + 901 + ENTER 3 + ENTER
Note:
» Keyboard Tamper.
» Factory Default: Enabled.
ENTER + 901 + ENTER 4 + ENTER
Note:
» Temporary Zone Cancellation.
» Factory Default: Enabled.
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 901 + ENTER 5 + ENTER
Note:
» Cancel by triggering.
» Factory Default: Enabled.
ENTER + 901 + ENTER 6 + ENTER
Note:
» Failure in the Electrical Network.
» Factory Default: Enabled.
ENTER + 901 + ENTER 7 + ENTER
Note:
» Main battery low or short-circuited.
» Factory Default: Enabled .
ENTER + 901 + ENTER 8 + ENTER
Note:
» Main battery missing or inverted.
» Factory Default: Enabled.
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 902 + ENTER 1 + ENTER
Note:
» AUX output overload.
» Factory Default: Enabled.
ENTER + 902 + ENTER 2 + ENTER
Note:
» Cut or short-circuit in the siren.
» Factory Default: Enabled.
ENTER + 902 + ENTER 3 + ENTER
Note:
» Telephone line failure.
» Factory Default: Enabled.
ENTER + 902 + ENTER 4 + ENTER
Note:
» Low battery of the wireless sensor.
» Factory Default: Enabled.
ENTER + INSTALLER
PASSWORD
Factory default: 9090
ENTER + 902 + ENTER 5 + ENTER
Note:
» Deactivation by computer or telephone.
» Factory Default: Enabled.
ENTER + 902 + ENTER 6 + ENTER
Note:
» N/A
» Factory Default: Enabled.
ENTER + 902 + ENTER 7 + ENTER
Note:
» N/A.
» Factory Default: Enabled.
ENTER + 902 + ENTER 8 + ENTER
Note:
» Medical Emergency.
» Factory Default: Enabled.