Intellian i3 User Manual

45
Setting Antenna Go Position
The antenna can be controlled manually by using the ACU.
1. Press YES to enter setup mode.
2. Press NEXT nine times to enter antenna go
position mode.
3. Press YES to go position.
4. Input position value for azimuth (AZ) axis.
+increases the value. - decreases the value.
Change the underscored digit using the
+/- buttons.
Press INPUT to accept the value and move to
next digit.
Press BACK to move to previous digit.
Press ENTER to move to next screen.
SETUP MODE ?
SET SAT PAIR ?
ANT GO POSITION ?
GO TO AZ : ##.#
YES
PREV
PREV
-
NO
NEXT
NEXT
+
YES
YES
INPUT
X9
5. Input position value for elevation (EL) axis.
+ increases the value. - decreases the value.
Change the underscored digit using the
+/- buttons.
Press INPUT to accept the value and move to
next digit.
Press BACK to move to previous digit.
Press ENTER to move to next screen.
6. Press YES to move the antenna to input position.
Press NO to return to the Antenna Go Position
mode.
7. Press EXIT to return to main setup mode.
GO TO EL : ##.#
GO TO POSITION ?
AZ:###.# EL:###.#
-
YES
+
NO
EXIT
INPUT

Intellian i3 Specifications

General

Brand	Intellian
Model	i3
Category	Antenna
Language	English