Intellian i6 User Manual

38
Intellian Satellite TV Antenna Systems
Setting the Antenna Parameters
It is not recommended for a novice satellite service user to use this
mode. Consult Intellian for changing antenna parameters.
1. Press YES to enter setup mode.
2. Press the NEXT three times to enter set antenna
parameter menu.
4. Select the PARAM*.
PREV - Shows previous parameter.
SELECT - Set the displayed parameter.
NEXT - Shows next parameter.
Press ENTER to move to next screen.
SETUP MODE ?
SET SAT PAIR ?
PARAM: SCAN OFFSET
YES
PREV
PREV
NO
NEXT
NEXT
YES
YES
X3
5. Input the WRS LEVEL.
+ increases the value. - decreases the value.
Change the underscored digit using the +/-
buttons.
Press INPUT to accept the value and move to
next digit.
Press BACK to move to previous digit.
Press ENTER to move to next screen.
6. Press YES to setup another parameter.
Press NO to cancel and return to main setup
mode.
7. Press YES to save the input information.
Press NO to cancel and return to main setup
mode.
WRS LEVEL : 0500
ANOTHER PARAMETER
SAVE ?
-
YES
YES
+
NO
NO
INPUT
3. Press YES to set antenna parameter.
SET ANT PARAMETER
PREV NEXTYES

Intellian i6 Specifications

General

Brand	Intellian
Model	i6
Category	Antenna
Language	English