Need help?Do you have a question about the Intellian v85NX and is the answer not in the manual?
General| Antenna Diameter | 85 cm |
|---|---|
| Frequency Band | Ku-band |
| Stabilization | 3-axis |
| Azimuth Range | Unlimited |
| Tracking Type | Auto |
| Pointing Accuracy | 0.2° |
| Wind Survivability | Up to 100 km/h |
| Power Consumption | 150 W |
| Operating Temperature | -25°C to +55°C (-13°F to +131°F) |
| Humidity | Up to 100% (condensing) |
| Compliance | CE, FCC |
Introduces the v85NX Ku-band 3-axis stabilized VSAT maritime antenna system.
Details the advanced features of the v85NX system.
Explains how to align the antenna's bow marker with the ship's centerline.
Provides examples for designing and sizing the antenna mast.
Guides on choosing an optimal location for the antenna on the vessel.
Advises on preventing interference from radar and managing RF radiation hazards.
Explains how to route cables on and inside the mast correctly.
Provides step-by-step instructions for installing the antenna unit.
Details how to lift and position the antenna onto the mast.
Guides on securely mounting the radome onto the mast.
Details how to connect the RF cable between the ACU and the antenna.
Guides on choosing a suitable location for the ACU.
Details how to mount the ACU, typically in a 19" rack.
Shows the basic connection diagram for a single antenna system.
Illustrates the connection diagram for a dual antenna system.
Identifies the ports on the ACU's rear panel for cable connections.
Details connecting antennas for a dual antenna system.
Guides on connecting the ACU to the satellite modem.
Explains how to connect the ship's gyrocompass to the ACU.
Guides on establishing communication between the ACU and a PC.
Explains how to connect to the ACU using Wi-Fi.
Guides on powering on the system and accessing the AptusNX software.
Introduces the wizard for system installation and commissioning.
Guides on setting the GPS position for satellite search.
Guides on setting the ship's heading device and connection status.
Guides on performing a line-up test to confirm antenna performance.
Guides on running antenna diagnosis tests and interpreting results.
Refers to the operating install wizard section for detailed setup.
Displays current firmware versions and guides on upgrading antenna firmware.
Provides step-by-step instructions for manual firmware upgrades.
Guides on uploading and upgrading iARM firmware.
Guides on running antenna diagnosis tests to check the antenna status.
Sets current antenna position and search parameters.
Provides detailed technical specifications for the antenna system.
To Next Page
