Intellian v85NX - SNMP Setting; SNMP Agent Configuration

98
Using AptusNX
SNMP Setting
No. Item Description
1
SNMP Setting Sets SNMP conguration.
2
SNMP Agent
Conguration
Sets the SNMP conguration.
• SNMP V1/V2 Status: sets SNMP mode.
• V1/V2 Community Name: sets SNMP V2 community name.
• V3 Authentication Type: sets SNMP V3 authentication mode.
• V3 Authentication Encoding: sets SNMP V3 authentication
• encoding.
• V3 Username: sets the V3 username of the SNMP Agent.
• V3 Password: sets the V3 password of the SNMP Agent. The password must
be at least eight character string.
• V3 Private Encoding: sets SNMP V3 Private Encoding.
• V3 Private Password: sets the V3 password of the SNMP Agent. The Password
is must be at least eight character string.
• TRAP IP/Port: sets the V3 password of the SNMP Agent. The Password must
be at least eight character string.
• TRAP Parameter: sets the SNMP trap specic parameter.
Click the "Apply" button to apply the settings to the system. Then perform the
"iARM Save & Reboot" on page 79.
1
2