Appendix A
Using Dual Antenna System (Optional)
The Intellian's new ACU has embedded Dual Antenna Mediator function, which utilizes to switch between two
Intellian VSAT antenna systems simultaneously. When one antenna is blocked by obstacles or has suddenly lost
service, another antenna will immediately provide the fail-safe operation to maintain the highest levels of system
performance and reliability. It ensures always-on broadband service by reducing the out of service time.
To use the Dual Antenna System, make sure that the antenna system components are properly installed. Refer
to the "Dual Antenna System Conguration (Optional)" on page 34 for more details.
Access the AptusNX (IP Address: 192.168.2.1) to manage and control the Dual Antenna System. You can check
the status of Dual Antenna System via AptusNX. The information for two antennas (Primary and Secondary
Antenna) is displayed on the Top Menu and the three panels (Dual Antenna Status, Primary Antenna and
Secondary Antenna) is displayed on the dashboard screen.
Dual Antenna
Status
Secondary Antenna
Primary Antenna Info. Secondary Antenna Info.
Primary
Antenna
To control and manage the Dual Antenna System, go to the "SETUP" "Mediator" menu. Refer to the "Mediator
Setting (For Dual Antenna System)" on page 100 for more details. Also using the "Shortcut" button on right side
of the panel at the "DASHBOARD" menu, you can easily access the setting page.
Mediator Setting Menu
Shortcut
Button
Dashboard Panel
To Previous Page
Loading...
Need help?
General
