ü
USB Function Menu Display
ü
Upgrade Firmware to ACU
USB FUNCTION
BACK
LOG DOWNLOAD FIRMWARE UPLOAD
BACKUP TO USB RESTORE FROM USB
USB FUNCTION
BACK
LOG DOWNLOAD FIRMWARE UPLOAD
BACKUP TO USB RESTORE FROM USB
FIRMWARE UPGRADE
Press
Select Key
Press
Select Key
Press
Move Key
x2 times
FIRMWARE UPLOAD
To use Firmware Upload function, you need to design the folder structure. It supports up to FAT32. The ACU
is upgraded with the FWP le in the designated folder of a USB memory stick.
NOTE
NOTE
When you want to return to the previous display, select "BACK" screen then press the "Select" key.
INVALID
BACK
FILE FORMAT
FILE
BACK
NOT FOUND
If the rmware le does not match the le format, the "INVALID FILE FORMAT" message will appear.
If there is no rmware le on the USB memory stick, the "FILE NOT FOUND" message will appear.