Intellian i6 User Manual

66
Intellian Satellite TV Antenna Systems
- Threshold Setting
• Initial Sat Count: Set the threshold count for maintaining tracking.
• Set Verify Time:Set the time of verifying whether the signal detected is
the signal of target satellite.
• Voltage Threshold: Set the voltage threshold. The voltage threshold is
to distinguish the voltage between 13V and 18V.
• DiSEqC Threshold: Set the DiSEqC threshold. The DiSEqC threshold is
to distinguish the 0KHz tone and 22KHz tone.
• WRS Detect Level: Set the WRS detection level.
- Flag Setting
• Use WRS Method: Use WRS method is to determine whether the
system uses “WRS Detect Level” or not. Use WRS method and “WRS
Detect Level” are pair functions.
• Use Offset Difference: Use offset difference is to determine whether
the system uses “Offset Difference” or not. Use Offset Difference and
“Offset Difference” are pair functions.
• Use DiSEqC 1.2: Use DiSEqC 1.2 is to determine whether the system
uses “DiSEqC 1.2” or not.
3. Satellite (Satellite View)
The name, longitude, verication method of the satellite and LNB local
frequency are displayed.
- LNB Local Frequency: Displays or sets LNB local frequency and its
corresponding LNB voltage supplied. You may select pre-programmed
LNB LO settings from the drop down list..

Intellian i6 Specifications

General

Brand	Intellian
Model	i6
Category	Antenna
Language	English