4. CODE 101 is being tested.
Press EXIT to return to main setup mode.
5. CODE* 101 has passed.
Press EXIT to return to main setup mode.
CODE 101 TESTING
CODE 101 PASSED.
RESULT: ?
RESULT: ●
EXIT
EXIT
Executing Antenna Diagnosis
The antenna status can be checked by reviewing the results of the
diagnostic self-test of the antenna. Refer to the following codes to understand the test results.
1. Press YES to enter setup mode.
2. Press NEXT eleven times to enter Antenna
Diagnosis mode.
3. Press YES to diagnosis antenna.
SETUP MODE ?
SET SAT PAIR ?
ANT DIAGNOSIS ?
YES
PREV
PREV
NO
NEXT
NEXT
YES
YES
X11
To Next Page
Loading...
