Interacoustics AA222 User Manual

AA222 Instructions for Use – US Page 55
3.9.3 Sync mode
If there are several sessions stored on the AA222 (under one or more patients) that should be transferred to
the PC then the Sync tab can be used. The screen shot below shows the Diagnostic Suite with the SYNC
tab open (underneath the AUD and IMP tabs in the upper right corner).
The SYNC tab provides the following options:
Client upload is used for uploading clients from the database (Noah or OtoAccess™) to the AA222. The
internal AA222 memory can hold up to 500 clients and 50,000 sessions.
Session download is used to download (audiogram and/or tympanometry) sessions from the AA222
memory to Noah, OtoAccess™ or XML (the latter when running the Diagnostic suite without a database).
3.9.4 Client upload
The following screen shot shows the client upload screen:
• On the left hand side it is possible to search for the client in the database in order to transfer to the
database using different search criteria. Use the “Add” button to transfer (upload) the client from the
database to the internal AA222 memory. The internal AA222 memory can hold up to 500 clients and
50,000 sessions.
• On the right hand side the clients currently stored in the internal AA222 memory (hardware) is
shown. It is possible to remove all clients or individual clients using the “Remove all” or “Remove”
buttons.

Interacoustics AA222 Specifications

General

Brand	Interacoustics
Model	AA222
Category	Measuring Instruments
Language	English