AA222 Instructions for Use – US Page 22
H
Under Printer color mode you can select if your printer should print in black and white or 3 color
(CMY) or 4 color (CMYK) mode.
Startup screen
I Select the startup screen for the device Aud or Imp
In addition the following buttons are available:
Pressing Install allows you to install new firmware on the AA222. When pressing
Install, the instrument will look for a USB dongle. If there are one or more installation
files available, the installation will commence after confirming this action.
Holding the Language button and rotating the wheel (34/38) allows selecting one of
the available languages. Note that the system needs to be restarted before the new
language setting is used.
Press Exit to leave Instrument settings
3.4 About
Shift+Setup opens the following ‘About’ box that provides information about the firmware OS version, DSP
version and license configuration. In addition, it states which transducers the device is calibrated with.
To Next Page
Loading...
