D-0134090-A – 2022/11
VisualEyes™ - Instructions for Use - EN Page 3
On top of the standard modules, different optional add-on modules can be added to some of the
configurations:
• VORTEQ™ Assessment (VisualEyes™ 505 / VisualEyes™ 515 / VisualEyes™ 525)
VORTEQ™
Assessment is an add-on module including the VORTEQ™ 2
nd
Generation IMU and
headband for head position and velocity tracking.
The module adds the following measurements on top of the extisting test battery:
o BPPV Module
Advanced Dix Hallpike
Lateral Head Roll
o Dynamic Visual Acuity
o Gaze Stabilization Test
• VORTEQ™ Diagnostic (VisualEyes™ 525)
VORTEQ™
Diagnostic is an add-on module including the VORTEQ™ 2
nd
Generation IMU for head
position and velocity tracking.
The module adds the following measurements on top of the extisting test battery:
o vHIT VORTEQ™
o Active Head Rotation
• Research Module
The Research Module is an add-on module allowing for easy export of raw data along with
adjustment of nystagmus detection parameters.
• External Sync.
This is an add-on option allowing communication through OtoAccess® API.
• EOG Accessory kit for VNG (VisualEyes™ 515 / VisualEyes™ 525)
The EOG Accessory kit for VNG is an add-on module including the DataLink used for ENG testing.