Need help?Do you have a question about the Intercomp PT300 and is the answer not in the manual?
Lists general controls like On, Off, Print, lb/kg, Test/Zero, Local/Total, Hold/Rel, Lamp.
Details voltage, batteries, and fuse specifications for the scale.
Covers accuracy, divisions, and speed of the weighing system.
Specifies operating and storage temperature and humidity ranges.
Provides dimensions and weight of the scale unit.
Discusses compliance with standards and certifications.
Lists various accessories like chargers, cables, and carrying cases for the PT300.
Turns the scale on and initiates a self-test sequence.
Turns the scale off.
Transmits data via cable to another device when cabled.
Converts displayed weight between pounds and kilograms.
Selects display mode between individual scale weight or sum of multiple scales.
Tests the display and zeros the scale.
Activates backlight for the display for night use.
Locks the highest weight displayed or allows normal weight display.
Details the process for charging the scale's internal batteries using AC or DC power.
Explains how to sum weights from multiple interconnected scales.
Describes how the printer displays total weight from multiple scales.
Details serial ASCII transmission format and parameters.
Indicates an overload condition; reduce load to scale.
Indicates an underload condition; re-zero scale.
Indicates scale is seeking zero; may require calibration if persistent.
Diagram illustrating the cabling for four scales and a printer.
Diagram detailing a four scale totalizer cable with battery charger connection.
Diagram of a four scale totalizing cable with a 25-pin D-sub connector.
Diagram showing a four scale battery charging cable.
Diagram for current loop output connection to an Intercomp S400 Display.
Details the pin assignments for the PT connector.
Lists pin designations for internal plugs and receptacles.
Recommendations for weighing combinations and using dummy plates.
Provides visual examples of scale configurations for different vehicle types.
Illustrates common interconnection layouts for 4 and 6 scale systems.
Information needed when contacting Intercomp service for support.
To Next Page
General
