PT300 Users Manual
Rev E, April 1999
3
Introduction
This manual contains specifications and operating instructions for the PT300 system.
Specifications
Controls
General: On, Off, Print, lb/kg, Test/Zero, Local/Total, Hold/Rel, Lamp
Display: 0.5” 6 digit, LCD
Electrical
Voltage: 12 VAC,VDC
Batteries: 6 “AA” size alkaline or rechargeable ni-cad batteries
Fuse: Type #1AG1A (little)
Performance
Accuracy:
±1.0% of applied load or ±1 display graduation, whichever is greater.
Divisions: 20,000 lb / 9350 kg: Graduation = 50 lb / 25 kg
Speed:
≈1 sec to typical reading (static)
Environmental
Temperature:
Operating: -20°F to 150°F / -28°C to 65° C
Storage: -40°F to 170°F / -40°C to 75° C
Humidity: 10 – 95% non-condensing
Physical
Dimensions: Overall: 3 x 16 x 20 in. / 76 x 406 x 508 mm
Pad: 12 x 12 in. / 304 x304 mm
Weight: 37 lb / 16.8 kg
To Next Page
Loading...
