Need help?Do you have a question about the Intercomp LP600 and is the answer not in the manual?
Lists the key features and capabilities of the LP600 scale.
Details optional accessories available for the LP600 scale.
Describes the buttons, indicators, and display elements of the LP600 scale.
Provides details on power source, charging, current, and battery life.
Outlines the scale's speed, accuracy, and recommended calibration interval.
Specifies operating conditions such as humidity and temperature.
Details the dimensions and weight of the LP600 scale.
Covers radio frequency, license requirements, range, and battery life.
Provides a general overview of the control panel and its components.
Explains the Liquid Crystal Display (LCD) and its various indicators.
Details how to power the weighing system on and off.
Explains the function for printing and accumulating weight data.
Describes toggling between local and total weight displays.
Explains how to zero the scale and clear accumulated totals.
Describes the print mode where data is transmitted upon request.
Explains continuous data output at a predetermined rate.
Details the format of transmitted serial data.
Refers to sections detailing accumulating print formats.
Details the process of accumulating weight for vehicle axles.
Explains the standard accumulation of multiple items or weights.
Provides a step-by-step guide for accumulating weights.
Steps to verify the accuracy of the scale's calibration.
Procedure for adjusting the scale's calibration settings.
Instructions for setting the jumper to enable calibration mode.
Procedure for adjusting calibration for multiple load cell corners.
Procedure for adjusting calibration for a single load cell corner.
Accesses the menu for calibration parameter settings.
Guides through setting various calibration parameters.
Explains setting multiple graduation values for breakpoints.
Procedure for calibrating the scale using applied weights.
Details how to test the charger voltage output.
Describes how to test the scale's backlight.
Explains how to test the function of the scale's control keys.
Details testing the automatic power-down feature.
Provides general information about the scale's load cells.
Explains the color coding for load cell connections.
Describes how to check the zero output of a load cell.
Details how to check load cell resistance values.
To Next Page
General
