Intercomp LP600 - Specifications; Controls; Electrical; Performance

LP600 Users Manual
Rev E, February 2017
Page 6 of 43
Specifications
Controls
General
On/Off, Print/Accumulate, Local/Total, Zero
Display
5 1/2 digit, 1 inch liquid crystal display (LCD), with automatic back
lighting.
Indicators:
local weight, total weight, accumulated total weight
Electrical
Power Source
Dual power solar and batteries. Available direct
power 5 - 15 VDC, 100-240VAC when using
charger cable.
Direct Power Charging
Voltage
9 - 15 VDC.
Batteries
4-AA size NiMH recommended. For emergency
use, off-the-shelf alkalines can be used for a short
duration of about a week or less. Extended use
beyond this could result in battery leakage and
corrosion damage on the battery contacts in the
scale.
Cable Charging Current
50 mA.
Solar Power Current
25 mA with full sun.
Battery Life
Radio off: 250 hours plus solar power.
Radio on: 200 hours plus solar power.
With daytime outdoor use, the solar power allows
the scale to last a full year without requiring direct
power charging. It is recommended to change the
batteries on an annual basis. Note that the amount
of sunlight and/or geographic position can affect the
solar benefit.
NOTE: For special setups that require a scale
wireless ‘host’, that scale’s battery life is 40 hours.
Filtering
Adjustable averaging up to 30 seconds.
Auto-Zero
Satisfies all HB-44 requirements.
Performance
Speed
4 display updates per second
Accuracy
 1% of reading or  display graduation, whichever is greater.
Calibration
interval
Twelve months recommended