EasyManua.ls Logo

Intercomp LP600 - Environmental; Physical; Radio (optional)

Intercomp LP600
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LP600 Users Manual
Rev E, February 2017
Page 7 of 43
Environmental
Humidity
10 to 95% Non-Condensing.
Temperature
Operating: -28 C to +65 C. / -20 F to +150 F.
Storage: -40 C to +75 C. / -40 F to +170 F.
Ingress
Protection
IP67
EMI/RFI
Meets Mil Spec 461
Physical
Platform: 22.5" X 15.0" X 1.5“ / 569 X 381 X 38 mm
Overall (w/ skid guard): 33.25" X 18.5" / 845 X 470 mm
Overall (no skid guard): 33.25” X 16” / 845 X 406 mm
w/ skid guard: 51 lb / 23 kg
No skid guard: 47 lb / 21.4 kg
Radio (optional)
Radio frequency
ISM 2.4GHz, 802.15.4
License requirements
None. Pre-approved US/FCC, CAN/IC, EUR/CE
Range
200’ / 60m indoor, 300’ / 90m line of sight
Batteries (AC-PDA-RF only)
4-AA size alkaline or NiMH rechargeable
Battery life (AC-PDA-RF
only)
36 hours using NiMH 2500 or alkaline
* Radio notes: Frequency: ISM 2.4GHz (2.400GHz - 2.483GHz), with 12 channels (CH
1-12) within that range with each center frequency = 2405MHz + (CH * 5) MHz.Power
output63mW (18dBm), 10mW (10dBm) for international variant. Antenna is internal
surface mount with -1.5dbi gain, omni-directional.
WARNING: To satisfy FCC RF exposure requirements for mobile
transmitting devices, a separation distance of 20 cm or more should be
maintained between the antenna of this device and persons during device
operation. To ensure compliance, operations at closer than this distance is
not recommended. The antenna used for this transmitter must not be co-
located in conjunction with any other antenna or transmitter.
!

Related product manuals