LP600 Users Manual
Rev E, February 2017
Page 5 of 43
Introduction
This operations manual describes the Intercomp Model LP600 platform specifications,
detailed operating procedures, and calibration.
This manual is separated into several sections, each containing information on a
different aspect of the platform. The specifications outline the design parameters for
the scale. The detailed operation section outlines the correct use of the scale for most
applications. The calibration section explains how to set the platform's adjustments.
Caution: Your LP600 scale is covered by a one year warranty and should be referred
to the factory for maintenance within the warranty period. Attempts to make any
extensive repairs within the warranty period may invalidate the warranty. If repairs are
needed after the warranty period, only qualified technicians should attempt such
repairs.
Features
lb or kg programmable readout.
Ability to display total weight.
Accumulating total function.
Auto zero tracking automatically corrects zero-weight display shifts.
5½ digit, 1 inch LCD readout, with automatic back lighting.
5-15 VDC and 120 VAC 60 Hz power sources standard.
RFI/EMI protection.
Low battery detection with automatic shutoff to protect batteries.
Built-in self-diagnostics to check: Load cells, Memory, Display, AD converter, and
Power supply.
Weigh pads manufactured from high strength aluminum alloys.
OPTIONS
Carrying cases for weigh pads and platform scales.
Radio for wireless operations
Data Acquisition Computer
To Next Page
Loading...
