Interlogix TruVision NVR 10 - Playing Back Recordings by Event

98 TruVision NVR 10 User Manual
Playing back recordings by event
You can search recorded video by event type: motion, and alarm input.
To play back search results:
1. In live view mode right-click the mouse and in the mouse menu select Advanced
Search > Event.
2. Select the desired event type as well as start and end times of the recording.
3. Select the desired alarm inputs.
If you selected “Motion” as the event type, select the required IP cameras.
4. Click Search. The list of search results appears.
5. Select the desired video from the list.
6. Play back the search results:
If there is only one camera in the search result, click its playback button.
Playback starts.
If there is more than one camera listed, click the playback button of one of the
cameras. Playback starts.
7. To hide the playback control toolbar during playback, right-click the mouse and
select Control Panel button from the list. Click again for the panel to reappear.
8. Use the playback control toolbar to manually control playback.
9. To play back another event video, move the cursor to the right edge of the window
to display the list of event videos and select the desired video.
10. To do another search:
Click Exit in the playback control toolbar to return to the search results window.
- Or -
Right-click the mouse and select Exit from the list to return to the search results
window.
- Or -
Right-click the mouse and select Event Search from the list to return to the search
window.
- Or -
Click the Search icon in the playback control toolbar to return to the search results
window.