66 TruVision NVR 10 User Manual
4. Click Quick Add to add the selected cameras to the list of devices in the NVR
system.
The cameras are added to the end of the list of devices.
5. To test if a camera connection is operational, select the desired camera from the list
of devices connected to the NVR and click Live. A pop-up window should appear
showing the camera’s live view.
To manually add an IP camera:
1. From the menu toolbar, click Camera Management > Camera.
2. Click Add to add the camera to the list of devices in the NVR system.
The camera is added to the end of the list of devices.
Note: Only one camera can be manually added at a time.
To change the information about a listed IP camera:
1. From the menu toolbar, click Camera Management > Camera.
2. Click the Edit icon for the selected camera. In the pop-up window, select the
desired options.
To change the method used to add an IP camera, under Adding Method select
Manual or Plug-and-Play from the drop-down list.
If Manual is selected, enter the details about the camera.
3. Click OK to save the changes.
Configuring the camera OSD settings
The on-screen display (OSD) settings appear in live view mode and include the camera
name, time and date. They also are included in recordings.
You can also adjust the transparency of the OSD relative to the background so that it is
easier to read or is less prominent on screen.
To Next Page
Loading...
