TruVision NVR 10 User Manual 5
Chapter 1
Product overview
Installation environment
The TruVision NVR 10 is a versatile, user-friendly embedded network video recorder
(NVR) allowing end-users to record up to 16 cameras with a maximum total input
bandwidth of 20/40/80 Mbps for 4, 8, and 16 channels, while providing integration with
the UTC portfolio of security solutions, and offering a seamless product experience
within the TruVision brand.
Its embedded PoE ports allow for a true plug and play setup for TruVision IP cameras
where the recorder automatically assigns the IP camera with an IP address and sets it
up at default configurations. Adding cameras was never easier.
Note: The non-PoE version of the NVR is not available in the Americas.
Its dual streaming functionality allows the user to set up different settings for recording
and streaming video in live view mode using main and substreams.
The TruVision NVR 10 can be configured through the OSD, web browser, and
TruVision Navigator via the SDK.
It can fully integrate with the license-free TruVision Navigator software, which is ideal
for most commercial applications. TVN 10’s easy and intuitive-to-use web browser
interface enables remote configuration and secure viewing, searching, and playing
back of video from computers connected via the Internet.
To Next Page
Loading...
