TruVision NVR 10 User Manual 17
Chapter 4
Operating instructions
Controlling the TVN 10
There are several ways to control the NVR:
• Front panel control
• Mouse control
• IR remote control
• TVK-800 keypad control (from TVK-800 firmware version 1.0.i)
• Web browser control (TruVision Navigator, TVRmobile)
You can use your preferred control method for any procedure, but in most cases we
describe procedures using mouse terminology. Optional control methods are given only
when they differ substantially from mouse control methods.
Using the front panel
The function buttons on the front panel control can be used to operate most, but not all,
of the main functions of the NVR. The LED indicators light up or flash to alert you of
various conditions. The functions available can be limited by setting passwords. See
Table 2 on page 18 and Table 3 on page 19 for more information.
To Next Page
Loading...
