106 TruVision NVR 10 User Manual
crosses in front of several cameras you can save the video clip of the intruder’s path
across these cameras in a single file.
Up to 30 video clips can be made from a recording.
Note: This feature is only available using the mouse.
To export video clips during playback:
1. Connect the backup device to the NVR.
2. Search for the required files to play back. See “Searching recorded video” on page
96.
3. Select the file or files to play back and click Play. Playback starts immediately.
4. Click the playback timeline where you want the video clip to start and click the Start
Clip button.
5. Click the playback timeline where you want the video clip to stop and click the End
Clip button.
6. Repeat for additional clips.
7. Exit playback mode. A message appears asking if you want to save the video clips.
8. Click Yes to archive the clips. The Export window appears.
Click No to exit and return to the previous window. The clips are not saved.
9. In the Archive window, select the backup device to be used from the drop-down list.
10. Click Archive. File downloading starts.
Note: You can create a new folder for the video clips. Press the New Folder button
and enter the folder name.
Archiving snapshots
You can save all the video snapshots recorded to a backup device.
To archive snapshots:
1. Connect the backup device to the NVR.
2. Search for the required snapshot files to play back. See “Slideshow of snapshots”
on page 100. The list of snapshots appears.
3. Select the snapshots to backup.
4. Click Archive. Select the archiving device, if different from that listed.
5. Click Archive. Export starts immediately.
6. When completed, click OK. Click Cancel to return to the previous window.
To Next Page
Loading...
