122 TruVision NVR 10 User Manual
Local configuration
Local configuration lets you define communication and network parameters such as
protocol type, maximum file size, stream type and network transmission settings. You
can also specify the directory locations for saving recorded and playback video,
captured images, and downloaded files.
Camera management
You can add, modify, and delete IP cameras as well as add cameras from the external
(LAN) network. See Figure 33 on page 121.
Select “PoE Information” to get information on the PoE power consumption. See “PoE
power budget” on page 70 for more information on this function.
Remote configuration
See Table 19 below for an overview of the remote configuration menu functions. Please
refer to the specific sections on the OSD menu functions for more information on
configuring these functions.
Note: The configuration settings defined remotely are different from those that can be
defined locally.
Table 19: Description of remote configuration menus
Menu Function Description
Device
Parameters
Device Information Device name: Define the NVR name. The default name
is TVN 10.
Device no.: The device number to use for the NVR when
programming the remote control. The default value is
255.
Time Settings Define time and date. See “Configuring time and date” on
page 81 for more information. See “NTP server” on page
49 for information on setting up NTP time settings.
Holiday Settings Define how recordings occur during holiday periods. See
“Holiday schedules” on page 32 for more information.
Camera Settings Display Settings Define which information is displayed on-screen. See
“Configuring the camera OSD settings” on page 66 for
more information.
Video Settings Define general recording settings. See “Configuring
recording schedules” on page 30 for more information.
Record Schedule Define the recording schedules. See “Configuring
recording schedules” on page 30 for more information.
Motion Detection Define motion detection parameters. See “Setting up
motion detection” on page 38 for more information.
Privacy Mask Define the on-screen privacy mask areas. See “Setting
up privacy masking” on page 67 for more information.
To Next Page
Loading...
