TruVision NVR 10 User Manual 123
Menu Function Description
Tamper Mask Define the video tampering detection settings. See
“Detecting video tampering” on page 44 for more
information.
Video Loss Define the video loss detection settings. See“Detecting
video loss” on page 43 for more information.
Text Overlay Add extra lines of text on screen. See “Text overlay” on
page 126.
Restricted Access
Camera
Define the cameras whose images cannot be displayed
by those not logged in. See “Hiding a camera image from
view” on page 69 for more information.
Capture Settings Define the resolution and image quality of snapshots.
Manual Record Define which cameras can manually record. See “Manual
recording” on page 33 for more information.
Network Settings General Define the general network settings. See “General
network settings” on page 46 for more information.
PPPoE Define the PPPoE settings. See “PPPoE” on page 47 for
more information.
DDNS Define the DDNS settings. See “DDNS” on page 48 for
more information.
Email Define the settings to send an email. See “Email” on
page 50 for more information.
UPnP Enable this function so that the NVR can automatically
configure its own port forwarding. See “UPnP” on page
51 for more information.
SNMP Define the SNMP settings. See “SNMP” on page 51 for
more information.
FTP Define the FTP settings. See “FTP server setup to store
snapshots” on page 51 for more information.
More Settings Define a remote alarm host, multicast IP as well as the
server, HTTP, and RTSP ports. See page 52 for more
information.
Alarm Settings Alarm Input Define the alarm input parameters for when an external
alarm is triggered. See “Setting up external alarms” on
page 41 for more information.
Alarm Output Define the response when an external alarm is triggered.
See “Setting up external alarms” on page 41 for more
information.
Advanced Settings Define the warning buzzer time. See “Modifying the
warning buzzer” on page 37 for more information.
Notification Define the notification parameters when irregular events
occur such as HDD full. See “Description of alarm
notification types” on page 37 and “Setting up system
notifications” on page 40
User Management Define, modify, and delete users. See Chapter 15 “User
management” on page 113 for more information.
To Next Page
Loading...
