126 TruVision NVR 10 User Manual
Searching for event logs
The NVR compiles a log of events, such as the start or end of video recording, NVR
notifications, and alarms, through which you can easily search. Logs are categorized by
the following types:
• Alarm: Includes motion detection, tamper detection, and other alarm events
• Notifications: Includes system notifications such as video loss, HDD failures, and
other system-related events
• Operations: Includes users access to the web interfaces and other operational
events
• Information: Includes general information on the NVR actions, such as the start
and end of video recording, etc.
To search for logs, click Log on the menu bar, select a log type, specify a date and
time range, and then click Search.
Text overlay
You can add up to four lines of text on-screen via the browser. This option can be used,
for example, to display emergency contact details. By default these lines of text are
positioned along the top of the window. The strings follow each other consecutively.
Note: This option is not available via the NVR.
To add on-screen overlay text:
1. In the browser toolbar, click the Configuration > Camera Settings > Text Overlay.
2. Select the desired camera.
3. Check the string box 1 for the first line of text.
4. Enter the text for string 1 in the column alongside. Up to 44 alphanumeric
characters can be used.
5. Repeat steps 3 and 4 for each extra line of text, selecting the next string number.
6. Click Save.
Controlling a PTZ dome camera
The web browser interface lets you control the PTZ functions of a dome camera. Select
a PTZ dome camera and use the PTZ controls on the browser interface to control the
PTZ functions. See Figure 35 on page 127.
To Next Page
Loading...
