18 TruVision NVR 10 User Manual
Figure 4: Front panel
Table 2: Front panel elements
. Live view button Switch to live view mode.
. Playback buttons See Table 3 on page 19 for a detailed description of all these
buttons for different tasks.
Reverse: In live view mode, use to play back the earliest
video. In playback mode, playback a camera in the reverse
direction.
Pause: In live view mode, freeze the last image of the live
display for all active cameras displayed. In playback mode, stop
playback.
Play: In live view mode, play 24-hour playback of the current
selected camera. In playback mode, play back a camera in the
forward direction. In search mode, play back a selected video or
view a snapshot.
. IR receiver Receiver for IR remote.
To connect the remote control to the NVR, press the Device button,
enter the device address, and press Enter. See “Using the IR
remote control” on page 21 for more information.
. Direction The DIRECTION buttons are used to navigate between different
fields and items in menus. In PTZ mode, it can control the
movement of the PTZ camera.
Enter button The ENTER button is used to confirm selection in any of the menu
modes.
See Table 3 on page 19 for a detailed description of these buttons
by different tasks.
. Alarm button Use to manually acknowledge an alarm.
In live view mode, contact the alarm recipient when an alarm/event
is triggered.
. USB Interfaces Universal Serial Bus (USB) ports for additional devices such as a
USB mouse, CD/DVD burner, and USB Hard Disk Drive (HDD).
. Archive button Press once to enter quick archive mode. Press twice to start
archiving. If the flash drive has an LED, it will flash during archiving.
. Display buttons See Table 3 on page 19 for a detailed description of all these
To Next Page
Loading...
