14 TruVision NVR 10 User Manual
Note: The system time and date are visible in the window. However, they do not
appear in recordings.
Click Next to move to the next page, or Previous to return to the previous page.
7. Network configuration:
Configure your network settings such as the NIC type, Enable or Disable DHCP, IP
address, subnet mask, default gateway, and UPnP. Enter the preferred DNS server
address as well as the alternate one to use.
Click Next to move to the next page, or Previous to return to the previous page.
8. HDD management:
Configure your HDD settings as required.
You can group HDDs and assign cameras to a group. See “Setting up HDD groups”
on page 58 for further information.
After configuring your HDD settings, click Initialize and Next to move to the next
page, or Previous to return to the previous page.
To Next Page
Loading...
