Interlogix TruVision NVR 10 - Page 24

22 TruVision NVR 10 User Manual
Figure 5: IR remote control
Item
Description
1
. Alarm
Acknowledge an alarm.
2
. Device
Enable/disable the IR remote control to control the TVN
10.
3
. Numeric buttons
Select a camera, and enter a number in a menu option.
4
. Display
Switch between the different multiviews.
5
. Mon A and Mon B
Switch between monitors A and B.
6
. Live
Return to live view mode.
7
. Menu
Activate the main menu.
8
. Seq
Start /stop sequencing.
9
. , , ,
In Menu mode: Use left or right arrow buttons to select and up or down arrow
buttons to edit entry.
In PTZ mode: Use to control PT
Z.
In Playback mode: Use to control playback speed.
10
. OK
Confirm selection.
11
. Zoom + and -
Use to control zoom of camera lens.
12
. Preset
Enter preprogrammed three
-digit code to call up a preset.
13
. Tour
Enter preprogrammed one
-digit code to call up a preset tour.