Interlogix TruVision NVR 10 - Page 27

TruVision NVR 10 User Manual 25
Icon Name Description
Camera managem
ent Configure camera settings including OSD display, motion
detection, privacy masking, video image adjustments, video
loss, add/edit camera, tamper-proof, restricted access
camera, and copy settings to other cameras. See Chapter 9
“Camera settings” on page 63.
Video schedule
Configure recording settings including recording schedules,
record quality, auto delete mode, recording mode, manual
record, and overwrite. See Chapter 5 “Recording settings”
on page 27.
Network settings
Configure standard network settings including IP address,
email notifications, DDNS setup, and advanced network
settings. See Chapter 7 “Network settings” on page 46.
Alarm settings
Configure alarm settings including alarm in
put, relay output,
buzzer time, and remote alert. See Chapter 6 “Alarm
settings” on page 37.
PTZ settings
Configure PTZ settings. See Chapter 11 “Controlling a PTZ
camera” on page 84.
User management
Configure users, passwords, and access privileges. See
Chapter 15 “User management” on page 113.
System settings
Export/import configuration file, configure system settings,
firmware upgrade, hard drive settings, and boot log. See
Chapter 8 “Storage management” on page 57 and
Chapter 14 “NVR management” on page 108.
Help information
Provides reference information to the various toolbars,
menus, and keys within the interface.
Power manager
Provides access to logout, reboot and shutdown options.
See “Turning on and off the NVR” on page 12.
To access the main menu:
1. In live view press the Menu button on the remote control or front panel.
- Or -
Right-click the mouse and select Menu from the pop-up menu.
The main menu window appears. The Display window appears by default.
2. Click the required menu icon to display its submenu options. Modify the
configuration parameters as required.
3. Click Apply to save the settings.
4. Click Back to return to live view.