76 TruVision NVR 10 User Manual
Figure 16: Quick access toolbar
Table 9: Description of the quick access toolbar icons
Icon Description
Freeze: Freeze the live image of the selected camera. Although the image pauses, time
and date information does not. The system clock continues to run.
Manual Recording: Start/stop manual recording.
The icon is red when manual recording is enabled. See “Manual recording” on page 33
for information on setting up this function.
Instant Playback: Playback the recorded video from the last programmed period
(default time is five minutes). If no recording is found, then there was no recording
made.
Click the icon and select the desired camera. Click OK.
See “Instant playback” on page 93 for information on programming this time.
Audio: Enable/Disable audio output. The audio option must already have been setup in
the Display menu.
Capture: Capture a snapshot of a video image. The image is saved on the unit.
PTZ Control: Enter PTZ control mode.
Digital Zoom: Enter digital zoom. See “Digital zoom” below for further information.
Image Settings: Enter the image settings menu to modify the image lighting levels.
There are three options:
Customize: Modify brightness, contrast, saturation, and hue values.
Default: Restore image settings to previous values.
These settings can also be modified from the Camera>Image menu (see page
“Adjusting video image settings” on page 68.
Auxiliary focus: Automatically focus the camera lens for the sharpest picture.
Lens Initialization: Initialize the lens of a camera with a motorized lens, such as PTZ
or IP cameras. This function helps to maintain lens focus accuracy over prolong periods
of time.
Close: Close the shortcut toolbar.
To Next Page
Loading...
