Interlogix TruVision NVR 10 - Page 88

86 TruVision NVR 10 User Manual
Figure 24: PTZ configuration window
Table 15: Description of the PTZ configuration window
Name
Description
1
. Save Preset Saves preset.
2
. Call Preset Calls up pre-existing preset.
3
. Shadow Tour
toolbar
Start recording the shadow tour.
Save the shadow tour.
Start the selected shadow tour.
Stop the selected shadow tour.
4
. Preset Tour toolbar
Add a step to a selected preset tour.
Start the selected preset tour.
Stop the selected preset tour.
Delete all the preset tour steps.
Scroll up the preset list.
Scroll down the preset list.
To set up a preset:
1. From the menu toolbar, click PTZ Settings > PTZ.
2. Use the directional, zoom, focus, and iris buttons to position the camera in the
desired preset location.