88 TruVision NVR 10 User Manual
3. In the preset tour toolbar, click to add a step to the preset tour. The Step pop-up
window appears. Select the preset number, dwell time, and speed of the step. Click
OK to save the settings.
Note: A preset tour should have at least two presets.
4. Repeat step 3 to configure other steps in the preset tour.
5. Click Back to return to live view.
To delete a preset tour:
1. From the menu toolbar, click PTZ Settings > General.
2. From the preset tour list, select a tour number and click to delete the preset for
the selected the preset tour.
– Or –
In the preset tour toolbar, click to delete all the presets for the selected tour.
3. Click Back to return to live view.
To call up a preset tour:
• PTZ control panel:
1. In live view, left-click the mouse and select the PTZ control icon in the quick access
toolbar. The PTZ control panel appears. Select the desired camera from the toolbar.
– Or –
On the front panel, select the desired camera and press Enter to call up the quick
access toolbar. The PTZ control panel appears.
2. Scroll the toolbar to Tour and double-click the desired preset tour from the list. The
camera immediately carries out the preset tour movement.
• Menu toolbar:
1. From the menu toolbar, click PTZ Settings > PTZ.
2. Select the desired preset tour from the list and click to start the preset tour. Click
to stop the preset tour.
3. Click Back to return to live view.
To Next Page
Loading...
