Interlogix zerowire ZW-6400 - 2.3 Arming with UltraSync: Away Mode; 2.4 Arming with ZeroWire: Away Mode with PIN

…C... 18 ZeroWire User Guide ..... I.....
2.3 Arming with UltraSync: Away Mode
You may arm your system using the UltraSync app from a mobile device:
1.
Check all Areas are ready.
2.
Press the Away button.
3.
Confirm system is armed.
2.4 Arming with ZeroWire: Away Mode with PIN
A solid green Ready key on the ZeroWire panel confirms you are ready to
arm. You may arm your system on the ZeroWire panel using your user PIN:
1.
Check ready key is green.
If flashing, some sensors are unsealed
but system is still arm-able.
2.
Check status key is green.
3.
Select the Away Mode.
4.
Enter your User PIN
5.
Leave the premises.
EXIT DELAY BEEPS
ENTER
USER PIN
CODE