Interlogix zerowire ZW-6400 - 2.6 Arming in Stay Mode, Illustrated

…C... 20 ZeroWire User Guide ..... I.....
2.6 Arming in Stay Mode, Illustrated
Use Stay Mode when you are staying in the premises and you want the
perimeter protected while allowing you to move around inside without
setting the alarm off. This gives you peace of mind even when you are at
home. For example, Stay Mode is often used at night to arm sensors
around the perimeter of your home and bypass internal motion detectors.
Perimeter detectors will still be active to detect intruders.
OR
Press Stay
On the panel
Press Stay
On the App
Panel
Ready Light is Green
UltraSync
All Areas tile is green
Downstairs protected