…C... 24 ZeroWire User Guide ..... I.....
2.12 Disarming using ZeroWire
Make your way to the ZeroWire through one of the designated entry/exit doors.
Once a detector detects your presence, the entry delay will begin
counting down and your ZeroWire will repeat a warning message until a
valid PIN code is entered. If a valid PIN code is not entered by the end of
the entry delay time, your sirens and communicator will activate.
Enter the premises through a designated entry/exit door.
Approach the ZeroWire. When you
are detected, the entry warning timer
will begin and the ZeroWire will
beep.
Enter your PIN code before the entry
delay expires.
All sensors are now disarmed, any bypassed sensors are restored
to normal operation.
If you require more time to disarm your system, the entry time can be
modified by a master user. Away and Stay modes can be configured with
different entry delay times, ask your service provider for further details.
Depending on how your system has been set up, entry through a non-
designated door may cause the alarm to sound immediately for greater
security.
To Next Page
Loading...
