Interlogix zerowire ZW-6400 - ZeroWire Keypad

…C... 8 ZeroWire User Guide ..... I.....
ZeroWire Keypad
ALARM
STAY
STATUS
AWAY
READY
RED
YELLOW
GREEN
RED
GREEN (STEADY)
System is in alarm.
Enter your PIN code
then ENTER to turn
off the alarm. Press
the STATUS key for
more info.
System is Armed
in
Stay Mode.
System is normal.
System is Armed
in
Away Mode.
All sensors are ready
and the system can
be armed in Away or
Stay mode
NOT LIT
YELLOW
NOT LIT
GREEN (FLASHING)
System is disarmed if
Away is also not lit.
Press the STAY key
to arm in Stay mode.
Non-urgent system
conditions present.
Press the STATUS key
for system conditions.
System is disarmed if
Stay is also not lit.
Press the AWAY key
to arm in Away mode.
Some sensors are
unsealed but system
is force-armable.
If these sensors are
not sealed by the end
of the exit time the
system may go into
alarm.
RED
NOT LIT
Urgent system
conditions present.
Press the STATUS
key for system
conditions.
If you are unable to
fix the issue, contact
your service provider
for help.
System cannot be
armed.
Press the STATUS key
for more info.
Hold down the key to send a
message to a central monitoring
center. Enter your PIN code then
ENTER to turn off a SOS alarm.
Features may be enabled by
professional security provider.
Press the BYPASS key if you wish
to isolate (ignore) a sensor.
Bypassed sensors will not be
active when the system is armed
in Stay or Away modes.
FIRE
BYPASS
Press the CHIME key to select
which sensors will make a
doorbell sound on the ZeroWire
when they are tripped.
MEDICAL
CHIME
Press the HISTORY key to listen
for alarm and event history.
POLICE
HISTORY