Interlogix zerowire ZW-6400 - Event History

…C... 32 ZeroWire User Guide ..... I.....
2.19 Event History
The Event History menu on the ZeroWire panelis used to listen to events
that occurred in your security system. These events include arming,
disarming, system faults and alarmed sensors. Ensure your clock is set
correctly as all events are time stamped.
To see event history you can use the UltraSync app. Press the menu
button and then History. The history screen appears, showing the latest
event recorded. You can press Oldest,
Previous, or Next to navigate through recorded events.
To listen to event history you can use the ZeroWire panel. “Alarm
Memory” will announce the last sensor(s) that caused your security
system to go into an alarm condition:
1.
Select History Menu
2.
Enter Master Code
3.
Listen to last alarm memory event
4.
Exits from History Menu
MASTER CODE
ENTER
1
MENU