Interlogix zerowire ZW-6400 - 2.7 Arming with UltraSync: Stay Mode; 2.8 Arming with ZeroWire: Stay Mode with PIN

…C... 21 ZeroWire User Guide ..... I.....
2.7 Arming with UltraSync: Stay Mode
1.
All Areas tile is green (ready).
2.
Press the Stay button.
3.
Confirm system is armed.
2.8 Arming with ZeroWire: Stay Mode with PIN
1.
Check status key is green.
Close all protected doors
and windows. If you have
motion detectors in your
“stay mode”, have everyone
leave those areas.
2.
Select the Stay Mode.
3.
Enter your User PIN
4.
Stay within the protected
areas.
If your service provider has set up the Quick-Arm feature, you can simply
touch the Stay key:
EXIT DELAY BEEPS
ENTER
USER PIN
CODE