22
Safety
Intended use
• The DIN-rail timer is intended solely for switching electric devices in private and commercial
areas, provided this does not infringe on the intended use of these devices.
• The DIN-rail timer may only be installed on DIN rails.
• Only use the DIN-rail timer in dry rooms and do not install close to devices with inductive dis-
charge (motors, transformers, etc.).
The intended use also includes compliance with all information specied in this manual. Any use other
than the intended use is considered incorrect use. The legal warranty is voided by any interference
with, or modications to, the device.
To Next Page
Loading...
