Chapter 7 — Troubleshoot and Maintain the Computer
100 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
Replace the Fuse
The CV41 uses a 10 A time delay (slow blow) fuse, which is located on
the smart dock. If you need to replace the fuse, make sure that you
replace it with the same size, rating, and type of fuse (Littelfuse 03260
10 MXP or equivalent).
1 Remove the CV41 from the smart dock. For help, see “Remove the
CV41 from the Smart Dock” on page 8.
2 Disconnect the smart dock from power.
3 Using a flathead screwdriver, remove the fuse holder from the
CV41.
4 Replace the fuse.
5 Secure the fuse holder back into the CV41.
To Next Page
Loading...
