Chapter 6 — Enable Screen Blanking
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual 85
Tools You Need
To install the switch , you need the following parts and tools:
• Switch
• Mounting hardware and tools
• Custom serial cable
Create a Custom Serial Cable
To install the switch , you need to create a custom serial cable with a
DB9 connector built to the following specifications outlined below.
Custom Serial Cable Pinout Specifications
Pin Signal Description
1 Not used
2 Not used
3 Not used
4 Not used
5 Not used
6 Not used
7 RTS Request to send output
8 CTS Clear to send input
9 Not used
9
5
6
1
To Next Page
Loading...
