Intermec CV41

Appendix A — Specifications and Default Settings
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual 111
Device Settings
Use device settings to configure settings on the computer.
RFID Settings
Use RFID settings to enable the RFID service.
Date and Time
Date and Time Setting Default Value
Date and Time Current date and time
Heater Settings
Heater Settings Default Value
Screen Heater Enabled
Screen Heater Turns Off at 0°C
Power Management Settings
Power Management Setting Default Value
Auto-On Standard
Screen Settings
Screen Setting Default Value
Brightness High
Screen Blanking On Motion Disable
Screen-On Delay After Motion Stops (sec) 1.0
RFID Settings
RFID Setting Default Value
Enable RFID Service Off