Intermec CV41

Chapter 1 — About the Computer
16 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
Insert an SD Card
You can use an SD card to increase file storage and install software.
The computer supports SD cards up to 32 GB.
1 Remove the computer from the smart dock.
2 Press the Power button. The computer turns off.
3 Using a small Phillips screwdriver, remove the two screws that
secure the SD card access panel.
4 Insert the SD card into the SD card slot.
5 Reattach the SD card access panel and screw to a torque value of
4-5 in/lbs.
6 Reattach the CV41 to the smart dock.
7 Press the Power button to turn on the computer.
SD card