Chapter 4 — Configure the Computer
52 CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
2 Select the Radio Enabled check box and tap OK. By default, the
computer uses Wireless security and enables DHCP.
3 Use Intermec Settings to configure any other parameters you need
to use for communication with your network.
4 Configure 802.11 security. For help, see “About Wireless
Security” on page 57.
About Bluetooth Communications
Your computer is Bluetooth™-enabled out-of-the-box. With
Bluetooth, you can connect to other Bluetooth devices, such as
scanners or printers.
Connect to a Bluetooth Scanner
You can connect the computer to an Intermec Bluetooth scanner, such
as the SF51 or SR61.
1 Tap Start > Settings > Control Panel > Bluetooth Scanning.
To Next Page
Loading...
