Chapter 3 — Manage the Computer
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual 39
After you locate these items, you can update your computer using
SmartSystems Foundation.
1 Open the SmartSystems console.
2 Make sure the computer is discovered.
3 Make sure the computer is in the powered smart dock and that
power management is disabled.
4 Download the SmartSystems bundle to your PC.
5 Double-click the SmartSystems bundle on your PC to extract the
update files to the Software Vault.
6 From the SmartSystems console, locate the bundle to install and
drag them to each computer (or group in a folder) you want to
update. The SmartSystems console installs the update to your
computers.
Update Individual Computers Using a USB Storage Device
You can transfer upgrade bundles from your desktop PC to your
computer using a USB storage device. Before you can update your
computer, you need:
• the SmartSystems bundles you want to install. These bundles are
available from the Intermec website at www.intermec.com. Go to
Support > Downloads > OS/Firmware/Drivers list.
• a USB storage device.
• USB Y-cable adapter
After you have located these items, you can update your computer.
1 Download the SmartSystems bundle to your PC and note the
download section.
2 Transfer the bundle file to the USB storage device.
3 Connect the USB storage device to the y-cable and to the CV41.
4 Run the .exe file from within the bundle.
5 Follow the onscreen instructions to update your computer.
Note: The SmartSystems console indicates that your computer is
offline by displaying a red stop symbol until the computer reboots and
connects to the system.
To Next Page
Loading...
