Intermec EasyCoder 3400e User Manual

HelvC
NugFont
C39
Operating the Printer
2-3
2
Use this chapter to understand how to use the printer front panel, load roll media and
media for self-strip printing, set the media sensitivity number, and communicate with
the printer.
Learning How to Operate the Printer
To operate the printer, you need to understand:
Front panel Explains how light emitting diodes (LEDs) help you monitor the status of
the printer and the various tasks the Feed/Pause button performs.
Loading media and ribbon Explains how to load roll media, thermal transfer ribbon,
and the procedure for using the self-strip option.
Media sensitivity numbers Explain how to optimize print quality and print speed.
Communications with the printer Explains different methods for transferring
information from the host to the printer and from the printer to the host.
Understanding the Front Panel
Use this section to understand the function of the front panel LEDs and the Feed/Pause
button.
3XXXU.024
Power/Data
Alert
Empty/Pause
Feed/Pause

Intermec EasyCoder 3400e Specifications

Cutting Specifications

rating for 0.005-inch paper	1, 000, 000 cuts
rating for 0.010-inch paper	500, 000 cuts
cutting method	Guillotine-type blade

Dimensions and Mounting

adds to printer length	0.5 inch
minimum media width	0.75 inch
maximum media width	4.5 inches

Media Specifications

maximum media thickness	0.010 inch
minimum liner weight	40 lb
minimum cut length	1.0 inch